Bloodhound Axe Heirloom Resin Cast

This is an unpainted resin cast inspired by Bloodhound's "Raven's Bite" heirloom from Apex Legends. What you will receive is a urethane resin cast fresh out of the mold for you to do your own sanding/finishing/painting!

Size is about 14.5 x 8.5 x 1.5" (36.8 x 21.5 x 3.8cm). It weighs about 1 pound (~467 grams).

Here is the process I follow after a new cast comes out of the mold, which you can follow along with or use as inspiration:

1. Sand the parting seam and any other rough areas (I usually use 120-220 grit sandpaper)
2. Fill in any bubbles/holes from the casting process (Bondo or superglue + baby powder is my go-to filler)
3. Wash the cast in soap + water (this removes the mold release from the cast which often prevents paint/primer from adhering properly)
4. At this point you're ready for primer! I recommend using a primer before any kind of paint because it'll help the paint stick better. Any rattle can primer from the store should work well enough.

This is a fan made replica and has no affiliation with any of the studios involved with the game or other media.